1、 Corner assembly equipment

鋁合金門窗和塑鋼門窗的組角方式不太一樣，后者是直接加熱焊接而成，前者是角碼連接。所以，在隔熱斷橋鋁門窗設備中就會使用組角機。組角機主要分為四頭組角機、雙頭組角機和單頭液壓組角機。就性價比方面來講，單頭液壓組角機是的選擇，也是當今市場上大家用的比較多的組角類門窗設備。至于四頭組角機和雙頭組角機，除非是工程方需要，否則很少有客戶購買這種設備。

The angle combination method of aluminum alloy doors and windows is different from that of plastic steel doors and windows. The latter is directly heated and welded, and the former is corner code connection. Therefore, angle machine will be used in heat insulation bridge broken aluminum door and window equipment. Angle machine is mainly divided into four head angle machine, double head angle machine and single head hydraulic angle machine. In terms of cost performance, single head hydraulic angle assembling machine is the best choice, and it is also a more angle assembling door and window equipment used in today's market. As for the four head angle machine and double head angle machine, few customers buy such equipment unless required by the engineering party.

二、連接設備

2、 Connecting equipment

中挺連接方式以及框、扇組角方式的不同，鋁合金門窗設備與門窗的切割設備在選擇上要有很大所區別。門窗設備除了包括雙頭鋸以外，還有斷橋鋁門窗角碼切割鋸。隔熱斷橋鋁門窗雙頭切割鋸主要包括數控切割鋸、數顯切割鋸床、切割鋸床和普通的雙頭切割鋸床。其中數控切割鋸床加工速度快、效率高、準確度高。

Due to the difference of the connection mode of the middle stile and the angle combination mode of the frame and fan, the selection of aluminum alloy door and window equipment and door and window cutting equipment should be very different. In addition to the double head saw, the door and window equipment also includes the bridge broken aluminum door and window corner code cutting saw. The double head cutting saw for heat insulation bridge breaking aluminum doors and windows mainly includes NC cutting saw, digital display cutting saw machine, cutting saw machine and ordinary double head cutting saw machine. The CNC cutting sawing machine has the advantages of high processing speed, high efficiency and high accuracy.

三、銑削設備

3、 Milling equipment

鋁合金門窗設備主要包括端面銑床和鎖孔槽加工機。隔熱鋁合金門窗的中挺連接同樣不是焊接，而是采用螺接的形式。鋁合金門窗端面銑床主要用來銑削中挺型材的端面，從而中挺能夠和框料合理拼接。門窗設備中的鎖孔槽加工機，主要用于斷橋鋁門窗水槽、鎖孔的加工。

Aluminum alloy door and window equipment mainly includes end milling machine and lock hole slot processing machine. The connection of heat insulation aluminum alloy doors and windows is also not welded, but in the form of screw connection. The aluminum alloy door and window end milling machine is mainly used to mill the end face of the middle stile profile, so that the middle stile can be spliced reasonably with the frame material. The lock hole slot processing machine in door and window equipment is mainly used for processing the water tank and lock hole of bridge broken aluminum doors and windows.

鋁合金門窗設備廠家

Aluminum alloy door and window equipment manufacturer

四、沖壓設備

4、 Stamping equipment

鋁合金門窗設備主要分為氣動沖床和液壓沖床，用于沖壓水槽、執手孔等。

Aluminum alloy door and window equipment is mainly divided into pneumatic punch and hydraulic punch, which are used to punch water tank, handle hole, etc.