切割鋸

Cutting saw

以目前銷售Z好的數控定尺鋸為例：鋁門窗數控定尺雙頭精密切割鋸床主要用于門窗隔熱斷橋鋁型材和幕墻鋁型材的切割，采用數控定尺系統控制，切割尺寸精確，45度和90度兩種角度按鈕自動轉換，可實現大規模生產加工。

Take the CNC fixed length saw that is currently sold well as an example: the CNC fixed length double head precision cutting sawing machine for aluminum doors and windows is mainly used for cutting the thermal insulation bridge broken aluminum profile of doors and windows and the aluminum profile of curtain wall. It is controlled by the CNC fixed length system, the cutting size is accurate, and the two angle buttons of 45 degrees and 90 degrees are automatically switched, which can realize large-scale production and processing.

系統門窗設備

System door and window equipment

角碼鋸

Corner saw

以常用的重型角碼鋸為例：鋁門窗全自動重型角碼切割鋸專用于系統門窗角碼的切割，人工只需一次安裝型材，所有的加工過程機器自動完成，數字顯示切割數量，效率高且切割3mm長的角碼時保證沒有殘余尖角。

Take the commonly used heavy-duty corner code saw as an example: the full-automatic heavy-duty corner code cutting saw for aluminum doors and windows is dedicated to the cutting of system door and window corner codes. The profile only needs to be installed manually once, and all processing processes are completed automatically by the machine. The number of cuts is displayed digitally, with high efficiency, and it is guaranteed that there are no residual sharp corners when cutting 3mm long corner codes.

系統門窗加工設備

System door and window processing equipment

端面銑

End milling

以性價比較高的中端銑為例：鋁型材端面銑床適用于各種系統門窗鋁型材端面的銑削加工，可根據不同型材調整刀片高度及位置，生產效率高，一次可加工4至6根型材。

Take the middle end milling with high cost performance as an example: the aluminum profile end milling machine is suitable for milling the aluminum profile end faces of doors and windows in various systems. The blade height and position can be adjusted according to different profiles, with high production efficiency. It can process 4 to 6 profiles at a time.

鋁型材加工設備

Aluminum profile processing equipment

組角機

Angle forming machine

以下沉式組角機為例：鋁門窗下沉式重型同步組角機是生產高檔系統門窗的專用設備，適用于角碼結構性系統門窗90°角聯接。在傳統同步組角機的基礎上加大了工作臺面，同時內定位可降至工作臺下，便于組角時材料的取放。

Take the following sinking angle assembling machine as an example: the sinking heavy synchronous angle assembling machine for aluminum doors and windows is a special equipment for the production of high-grade system doors and windows, which is suitable for 90 ° angle connection of angle code structural system doors and windows. Based on the traditional synchronous angle assembling machine, the worktable is increased, and the internal positioning can be lowered under the worktable, which is convenient for taking and placing materials during angle assembling.

隔熱斷橋鋁加工設備

Heat insulation broken bridge aluminum processing equipment

仿型銑

Profiling milling

高速單軸仿形銑床主要用于系統門窗排水槽滑輪孔鎖孔五金件孔槽的銑削。

The high-speed single axis profiling milling machine is mainly used for milling the holes and grooves of pulley holes, lock holes and hardware parts of the drainage grooves of doors and windows.

隔熱斷橋鋁門窗設備

Thermal insulation bridge broken aluminum door and window equipment

五金件沖床

Hardware punch

主要用于平開系統門窗五金件安裝孔槽的沖壓。

It is mainly used for stamping the installation holes and slots of door and window hardware in the flat opening system.

系統門窗設備

System door and window equipment

以上的精彩內容來自：濟南天鑫數控設備有限公司系統門窗加工設備的介紹及分享，更多內容請繼續關注我們：http://www.jinesu.com

The above wonderful content comes from the introduction and sharing of system door and window processing equipment of Jinan Tianxin CNC Equipment Co., Ltd. please continue to pay attention to us for more content: http://www.jinesu.com